Installing a hand held shower head is a simple upgrade that can dramatically improve shower flexibility and comfort. The process typically involves attaching a hose, connecting the shower head, and mounting the bracket. Most installations can be completed within minutes and do not require advanced plumbing skills. A well-designed hand held shower head — such as those offered by COIGN — ensures a smoother installation thanks to durable connectors, universal fittings, and stable mounting components.

Installation Steps for a Hand Held Shower Head

Although the installation is straightforward, following a clear sequence ensures the shower head functions properly, seals tightly, and provides consistent water pressure.

Step 1: Remove the Existing Shower Head

Start by unscrewing the fixed shower head from the shower arm.
This can normally be done by hand, but if it is stuck, a wrench with a cloth wrapped around the fitting will prevent scratching. Clean the exposed threads to remove old tape or mineral deposits so the new connections will fit smoothly.

Step 2: Apply Thread Seal Tape

Wrap thread seal tape around the shower arm’s threads.
This step prevents leaks by creating a tight seal once the new bracket or diverter is attached. Make sure the tape follows the same direction you will tighten the new fitting, allowing it to grip properly instead of unraveling.

Step 3: Install the Mounting Bracket or Holder

Many hand held shower heads include a wall-mounted bracket or a bracket that attaches directly to the shower arm.
Screw the bracket onto the shower arm until snug. Avoid overtightening to protect the internal threads. For COIGN hand held shower head models, the mounting components are engineered with stable fittings that align smoothly with standard shower arms.

Step 4: Attach the Hose

Connect one end of the hose to the bracket and the other end to the hand held shower head.
Most hoses include rubber washers on both ends — confirm they are inside the fittings before tightening. Tighten each connection by hand. The flexibility and length of the hose allow comfortable movement during showering or rinsing.

Step 5: Attach the Hand Held Shower Head

Once the hose is attached, screw the shower head onto the hose’s end.
Check that the connection is secure but not overly tight. After attachment, place the shower head in the bracket to ensure it fits correctly and rests at the desired angle.

A quick overview of the installation components:

COIGN’s hand held shower head designs use reinforced connectors to ensure secure attachment and long-term leak resistance.

Installation Precautions

Installing a hand held shower head is relatively simple, but the following precautions help avoid leaks, damage, and poor alignment.

Ensure Washers Are in Place

Missing washers are a common cause of leaking hoses. Always check that each connection includes its rubber washer.

Avoid Excessive Tightening

Using too much force can crack connectors or deform threads. Hand tightening is usually enough for all fittings.

Confirm the Bracket Angle

The bracket should hold the shower head naturally without pointing water outside the shower area. Adjust the angle before final tightening.

Test Before Use

Turn on the water slowly and check each connection for small drips. If leaks appear, turn off the water, loosen the fitting, add tape, and reinstall.

Consider Hose Length

The hose should be long enough to reach comfortably but not so long that it tangles. COIGN hoses are designed with optimal length for daily use.

Summary

Installing a hand held shower head involves removing the old fixture, securing a mounting bracket, attaching a hose, and connecting the shower head. With proper preparation and careful tightening, the installation can be completed quickly and provides immediate benefits such as improved mobility, easier cleaning, and greater shower comfort.

For homeowners looking to upgrade their bathroom, COIGN hand held shower heads offer durable construction, ergonomic design, and universal fittings that simplify installation. A well-installed hand held shower head enhances convenience and delivers a more enjoyable showering experience every day.